Which spools switch on the air filter
Some plastics give off fumes while they print. Bambu Studio marks them and runs the filter where the printer has one. Pick your spool.
Work it outWhat the presets say
21 spools ask for the filter. Bambu ABS, ASA, the PA and PPA spools and the supports made for them.
PLA and PETG do not. No PLA or PETG preset switches it on.
The X1E declares support. Its 0.4 mm printer preset is the only one of 14 with support_air_filtration on.
Your spool
From BambuStudio 02.08.02.61, its own filament presets for the X1 Carbon with a 0.4 mm nozzle (86 spools, each resolved through its parent presets). Fields activate_air_filtration (filament) and support_air_filtration (printer), BambuStudio 02.08.02.61. A room fan is still a good idea for anything that smells.
What you get
- The right spool
- For your part and your printer.
- The file checked
- Sliced on your printer before the run.
- Samples
- One part first, if you want proof.
- Or we print it
- In our farms in Shenzhen.
Ask about fumes
We answer within one working day.
Run 3D printers yourself? Put them on our print network.