ce-net / design

Small CAD jobs at a fixed price.

Add a hole, make a part fit, draw a bracket from your measurements. You pay a fixed price instead of an hourly CAD rate, and you get the part back as STEP, STL and a PDF drawing, checked printable. If you want it made, a print shop in the ce-net network prints it.

Send your partSee the prices

Where it stands: the service opens now. The CAD is done by our AI agents with the same tools that built the parts further down this page, and every file is checked against its drawing and sliced in Bambu Studio before it goes to you. Simple jobs only: anything larger gets a quote through Foreman Engineering.

Three jobs, three prices

Change an existing part

Add a hole, make it fit something else, resize it, round an edge. Send the STEP or STL.

290 kr · EUR 25

Back in 24 hours

A simple new part

A bracket, adapter, jig or holder, from a sketch or your measurements.

990 kr · EUR 89

Back in 48 hours

Rebuild a part from photos

A broken or discontinued part, reverse-engineered from photos and a few measurements.

1,990 kr · EUR 179

Back in 3 days

Every delivery includes

  • STEP for your own CAD, STL for printing, and a PDF drawing with the dimensions and holes
  • Checked printable: sliced for a real printer, no unsupported overhangs or walls too thin to print
  • One revision included, if it does not fit the first time
  • Printed on request by a print shop in the CE Print network, priced before you order

Prices exclude VAT. You get an invoice after delivery.

How a job moves

  1. Send itThe file, a sketch or photos with a ruler in them, and one sentence on what the part has to do.
  2. Fixed price confirmedWe tell you which of the three jobs it is. If it is bigger, we say so before any work starts.
  3. Drawn and checkedParametric CAD, a drawing measured off the solid, and a real slice to prove it prints.
  4. DeliveredSTEP, STL and PDF by email, on time. Want it printed? Say so and a shop near you makes it.

Parts we have drawn

All of these were designed by the same agents and tools that do your job. The pictures are the real CAD output and the real prints, not illustrations.

CAD render of a two-part clamp holding a 4 mm hex bit, seen from four sidesThe printed clamp standing on the bed of a Bambu Lab A1 printer
A change to someone else's part. Seeed's robot gripper finger (their STEP file), changed to clamp a 4 mm hex screwdriver bit with one M3 screw. Seeed's four-screw mount is left exactly as it was. Printed in PETG: 17 g, 1 h 26 min on a Bambu A1.
Exploded CAD view of an RC car frame: floor, bumpers, servo mount, electronics cage and body postsEngineering drawing of the chassis floor: three views, a section, a hole table with 16 positions and a title block
An RC buggy frame, 16 parts, 13 drawings. Every part has a STEP file, a drawing with a hole table measured off the solid, and a print file. The whole car is 143 parts over four assemblies with 68 PDF drawings. Tap the drawing to see it full size.
Microduck, rebuilt from photos. Pollen Robotics sells this walking robot with its mechanics closed. Our agents rebuilt 22 of its parts in parametric CAD from the product photos, the published specifications and the open firmware, then walked the rebuilt robot in a physics simulation.
Render of a corner where three custom aluminium extrusions meet a printed corner node, with a blue panel held in the slot
A custom aluminium extrusion. A square profile that carries an LED strip, its diffuser, a panel and the wires inside the bar, plus the corner node that joins three of them. Drawn for a cocktail machine, with the die drawing notes for the extrusion maker; the corner was test-printed on our farm.

Send your part

Describe the job and link the files. You get a fixed price back within one working day, before any work starts.

Or email the files to [email protected]. Files are only used for your job. See privacy.

For print shops: sell CAD with your prints

Customers often arrive with a broken part and no file. Order the CAD from us at 30% off and sell it on at our list price or your own. The customer gets the part printed by you.

JobListYour price
Change a part290 kr · EUR 25203 kr · EUR 17.50
Simple new part990 kr · EUR 89693 kr · EUR 62.30
Rebuild from photos1,990 kr · EUR 1791,393 kr · EUR 125.30

Same delivery: STEP, STL, PDF drawing, one revision. We never contact your customer.

We write within one working day. See privacy.

What is built and what is not

Built and working

  • Parametric CAD with drawings generated and measured off the solid (ce-cad)
  • Printability checks and real slicing in Bambu Studio for every part
  • A print farm in Shenzhen and a growing network of print shops in Europe (CE Print)

Not yet

  • Upload on this page: send a link or email the files
  • Online payment: you get an invoice
  • Organic shapes, sculpted surfaces and full assemblies: those are quoted through Engineering