Nozzle and bed temperatures for your spool
The first layer and the rest are printed at different heat on some spools. Pick yours for the nozzle and bed numbers Bambu Studio uses.
Work it outWhat the presets say
PETG starts cooler. Bambu PETG HF: 230 °C first layer, then 245. ABS: 260 then 270.
11 spools change after layer one. The rest keep one nozzle temperature for the whole print.
Beds run 35 to 110. TPU 95A on 35 °C, PLA on 55, PC on 110.
Your spool
From BambuStudio 02.08.02.61, its own filament presets for the X1 Carbon with a 0.4 mm nozzle (86 spools, each resolved through its parent presets). Fields: nozzle_temperature_initial_layer, nozzle_temperature, hot_plate_temp, textured_plate_temp, cool_plate_temp. 0 means the plate is not for this spool.
What you get
- The plate to use
- For your spool and part.
- A first layer that holds
- Temperatures and speed set.
- The file checked
- Before the run.
- Or we print it
- In Shenzhen.
Ask about adhesion
We answer within one working day.
Run 3D printers yourself? Put them on our print network.