How much plastic sits in your hotend
Molten plastic waits in the hotend between nozzle and drive. On a colour change it is what has to be pushed out first. Bambu Studio stores the volume per printer.
Work it outWhat the presets say
107 mm³ in an X1 Carbon. The same on the P1 and X1 series.
From 92 to 145. 92 in the A1, A1 mini, A2L and X2D; 130 in the H2D; 145 in the H2S.
Small in grams. 107 mm³ of PLA at 1.26 g/cm³ is 0.13 g.
Your printer
From BambuStudio 02.08.02.61, its own printer presets for 14 Bambu Lab printers with a 0.4 mm nozzle, each resolved through its parent presets. Field: nozzle_volume. Densities of each spool: our spool-length page.
What you get
- A spare part, quoted
- We print it on the printer that suits it.
- The file checked
- Against the printer limits before the run.
- A printer that fits
- Which of our farm printers suits the job.
- Or we print it
- In our farms in Shenzhen.
Ask about colour changes
We answer within one working day.
Run 3D printers yourself? Put them on our print network.