ce-net / solutions

Spools your nozzle turns away

Swap to a 0.2 mm nozzle for detail or a 0.6 for speed and some spools stop being a good idea. Bambu Studio keeps a list of them and says so on the plate. Pick the nozzle you are about to fit and see which Bambu spools it turns away.

Check a nozzle

What the list says

0.2 mm: no sparkle, marble or wood. Marble, Sparkle, Wood and Galaxy PLA, and both translucents, are flagged on the smallest nozzle.

0.6 and 0.8: no silk, no foam. Silk, Silk+, PLA Aero and ASA-Aero are flagged on the bigger standard nozzles.

0.4 high flow: no fibre. All nine Bambu carbon and glass fibre spools are flagged on a 0.4 high flow nozzle, Bambu's and E3D's alike. On the bigger high flow nozzles none are flagged.

The nozzle you are fitting

    0.2 mm StandardBambu PLA Marble, Bambu PLA Sparkle, Bambu PLA Wood, Bambu PLA Galaxy, Bambu PETG Translucent, Bambu PLA Translucent
    0.4 mm Standardnone
    0.6 mm StandardBambu PLA Silk+, Bambu PLA Silk, Bambu PLA Aero, Bambu ASA-Aero
    0.8 mm StandardBambu PLA Silk+, Bambu PLA Silk, Bambu PLA Aero, Bambu ASA-Aero
    0.4 mm High FlowBambu PLA-CF, Bambu PETG-CF, Bambu ASA-CF, Bambu PAHT-CF, Bambu PET-CF, Bambu PA6-CF, Bambu PA6-GF, Bambu PPA-CF, Bambu PPS-CF
    0.6 mm High Flownone
    0.8 mm High Flownone
    0.4 mm E3D High FlowBambu PLA-CF, Bambu PETG-CF, Bambu ASA-CF, Bambu PAHT-CF, Bambu PET-CF, Bambu PA6-CF, Bambu PA6-GF, Bambu PPA-CF, Bambu PPS-CF
    0.6 mm E3D High Flownone

    From the slicer itself: resources/info/nozzle_incompatibles.json in BambuStudio 02.08.02.61, read by Print::get_incompatible_filaments_by_nozzle; PartPlate then shows "It is not recommended to print the following filament(s) with" the nozzle and the spools. It matches Bambu's own spools by name, so another brand's silk or sparkle PLA gets no message even where the same reason holds. The slicer gives no reason for any entry, so neither do we.

    What you get

    Your nozzle and spool checked
    Against the slicer's list and the printer's own limits.
    The right nozzle for the job
    Size and flow type for the detail and the speed you want.
    The file checked
    Temperatures and moves against the printer's limits before the first layer.
    Or we print it
    Fine-nozzle and fibre parts in our farms in Shenzhen.

    Ask about your nozzle

    We answer within one working day.

    We answer within one working day.

    Run 3D printers yourself? Put them on our print network.