The nozzle temperature range of your spool
Each spool in Bambu Studio has a range it accepts and a temperature it prints at. Type the temperature you use and see if it sits inside.
Work it outWhat the presets say
PLA Basic 190 to 240 °C. It prints at 220, near the middle.
Ranges run 20 to 70 °C wide. PLA Basic has 50 °C of room.
The hottest top out at 320 °C. Bambu PPA-CF, Generic PPA-CF, Generic PPA-GF.
Your spool
From BambuStudio 02.08.02.61, its own filament presets for the X1 Carbon with a 0.4 mm nozzle (86 spools, each resolved through its parent presets). Fields nozzle_temperature_range_low and _high, nozzle_temperature and nozzle_temperature_initial_layer, X1 Carbon 0.4 mm presets. Your spool batch can differ; the box label wins.
What you get
- The right spool
- For your part and your printer.
- The file checked
- Sliced on your printer before the run.
- Samples
- One part first, if you want proof.
- Or we print it
- In our farms in Shenzhen.
Ask about your settings
We answer within one working day.
Run 3D printers yourself? Put them on our print network.